LEDs fixtures and Tension wire grids

KacyC

Member
Hello all,

I did a search and didn't find any conversation on this topic, so I thought I'd start a new thread.
I'm looking for people who may have experience using LED fixtures to shoot through a TWG. What fixtures have you found to work better than others? Which have not worked? (Is it entirely down to whether the beams are homogenized?)
My office has been looking at this issue and found a few surprises combining the technologies. Continuing to run studies with different fixtures. I'm wondering what the larger CB community has seen.

Thanks in advance for your stories.
 
I actually just got done with a light hang with LED's and TWG. We hung ETC ColorSource spot (26 and 36 degree) and Colorsource Pars at about 18' height from deck to bottom of TSW. There was no issues with the final light hitting the stage (Full homogenized). The only issue is once all the lights were on we saw how dirty the TSW was and there was some light bounce off the TSW as well. We will be hanging some ETC Series 2 (19 and 26) in the thrust space with about a 35-50' throw and will followup to see how they turn out.
 

Users who are viewing this thread

Back