Can't find where to set my address???

11. 35 DMX512 DECODER is DMX decoder, completely accepting outside DMX512 signal to work. Taking 4 addresses, R(the first address), G(the second address), B(the third address), reserved channel(the fourth channel), in need of setting address by pressing PARA).

Click to expand...

MNicolai said:

Based on these instructions, or at least what I can decipher from the Chinese translation, you want to set it for Mode 35 [DMX DECODER] mode, and then jam on the PARA button to set the starting DMX address. Judging from the text below, it's possible you may have to manually set the DMX address for each of the 4 parameters, but usually you just need a single starting address.



Looks like the other "DMX MODE" is for running built-in chases and looks and isn't what you want. Possible the state you're in already if you're seeing a constant glow. This driver is built for LED's and shouldn't need a ghost load.

If in doubt, set it for DMX and run DMX 1-512 up to full and see what happens. Usually something like this would ship defaulting to Ch1 but experimentation is half the fun of buying generic Chinese electronics! You're lucky to have instructions at all even if it's in broken English.

Click to expand...