Source Four Focus Knob Socket

Source Four Focus Knob Socket 1.0

No permission to download
This device can be chucked into a normal 3/8" chuck allowing rapid removal and (low-torque!) installation of Source Four barrel knobs. The 3D printed shaft acts as an intentional torque limiter - print at normal wall and infill settings and the shaft will break off if you forget to turn the clutch on the drill down while tightening.

2022-02-23_10-18.png
Author
lonasindi
Downloads
1
Views
195
First release
Last update
Rating
0.00 star(s) 0 ratings

More resources from lonasindi