1. nick_fouts

    Water lighting effect options

    Hi all, I work for a community theatre whose beloved and well-used Chauvet Oceana finally bit the dust (lamp died and they don’t make replacements anymore). Are there any modern fixtures that create a similar effect, or a water effect in general? I’ve seen the ADJ H2O LED but I have a hunch...
  2. A

    Chauvet 4D Hazer Problem

    We have a couple of the Chauvet Hurricane Hazers. I'm having a weird issue and looking for ideas. The quick problem is that they lose DMX. They will be on, DMX engaged, all working fine, and then randomly the DMX channel starts flashing on the units and they quit working until a power cycle or...
  3. Soundsultan

    Chauvet Strike 4 flashing (not strobing)

    Has anyone in the booth, who has Chauvet's Strike 4 fixtures, experienced them FLASHING when running them to full intensity? It starts around 40% and stops at 75% and works great on either side of those values. It does the same thing when you completely remove DMX and just use the buttons on the...
  4. IanTech

    S4 Series 2 Lustr vs Ovation E-910FC

    Has anyone compared these fixtures? Any thoughts? I was thinking about purchasing a mix of them as I hear the Ovations have more saturated colors. I was thinking Ovations for high sides, back lighting, some front lighting and for the stage wash Source Four Series 2 Lustrs. I know buying...
  5. zackconn44

    Showbaby 6 with Chauvet freedom pars

    So I have a city theatrical Showbaby Wireless DMX 6 attached to my etc ion. I was wondering if that could connect to the wireless Chauvet FlareCon that is contained within each freedom par. I know they both run on the same frequency so how would I make them communicate?
  6. HiredSound

    Came here looking for "Moving heads" advice...

    I found this while googling: I have a small sound company and do primarily club bands. Maybe 25 to 30 shows a year. Club bands don't pay much, they simply can't. But I do occasionally get better paying...
  7. Adam R. Jezl-Sikorski

    Best remedy to create blacklight effect with CMY instruments?

    Hey All, I'm working on a production of "The Little Mermaid" and the director wants to play around with a blacklight effect for one or two of the songs. Budgets are a thing so I'm trying to work with the non-conventional instruments our venue has to offer first. We Have: 2 - SolaspotPro...
  8. Chris James

    Hello/Chauvet Haze blwr?

    Brief intro; I'm a budget minded musician in a few bands that also runs sound for other bands and getting into DMX lighting. With that said, I have a pair of old Chauvet Ultimate HZ hazers a fellow musician gave me (because someone put the wrong juice in a water based hazer!). They had been...
  9. jakob223

    Automated Fixtures Rogue R2 Spots - miscalbrating gobo wheel?

    Hi, I have 2 Rogue R2 spots, and one of them keeps having its gobo wheel become miscalibrated during a show. There are 2 things I can think of that might be causing problems, but I can't figure how they cause this in particular: - I've had them plugged in for a long time and we're not...
  10. S

    Data issue between Chauvet Boards and Eliminator Dimmer packs

    Hey all: I've had issues with Eliminator ED15 Dimmer packs briefly losing data signal from multiple Chauvet boards (this issue is worse with the Chauvet Stage Designer than it is with the Obey 70, but happens with both. I've had this issue when using wireless DMX (show babies) AND when using...
  11. SouthTownProd

    Working with Chauvet Intimidator Hybrids

    Hi, I'm currently working with 4 hybrids and i'm programming them for a concert in september. i'm noticing that the heads move pretty slow during scene transitions and i was wondering if there was a way to speed up the movements on the heads. some scenes only last for about 2 seconds and I was...
  12. tarnation

    Colorsource 20av vs. MyDMX 2.0 (Chauvet 4Bar Tri patching)

    I'd rather be light designing but I'm having issues with my Colorsource 20av, which I am demoing as a replacement for American DJ's MyDMX 2.0. Both have problems that I'll detail below. In general the two consoles are still "neck and neck" -- most of what the Colorsource does right MyDMX also...
  13. Z

    Chauvet Hurricane Haze 2D

    First, is this the correct forum for a hazer issue? If so, anyone knows how to take the Chauvet Hurricane Haze 2D apart to get to the pump?
  14. RoryG6

    Rogue r2 going rogue

    hi, I use an ect element lighting board at my school and we have 2 Chauvet Rogue R2 fixtures that we are having issues with. The main one being a loss of beam and strobing. After power on the lights may take time to recognise that they are turned on and will often strobe for no reason or go...
  15. bmcewing

    LED spot/profile recommendations

    Hello, I am currently halfway through upgrading my venue's lighting stock which consisted of strand 2k alto fresnels/profiles and 24 1k pars. Our strand 530i has been replaced with a grandma2 ultra light with additional touchscreen and fader wing. FOH: 6 b-eye k10s, 8 robe dl4s. On stage: 12...
  16. SouthTownProd

    I'm needing a little help with lighting configurations

    I recently decided to get the ADJ Wifly RGBW8C Wireless Controller and i was going to use my chauvet lights (slimpar 56's and colorpallete) with the board as a backup in case my laptop doesn't work. I hooked everything up like i did with my other board (ex. light to wifly adapter), but i noticed...
  17. B

    Automated Fixtures Experience with maintenancing Chauvet QWash 560z

    Hello! I'm currently in a venue, where due to a series of unfortunate events, almost our entire inventory of QWashs has stopped working, we think due to being powered off dimmers set to non-dim. From the research I've done, it seems as if the LED drivers are what has gone one. There are two...
  18. TheTheaterGeek

    Chauvet Hurricane Haze 2D Issues

    We have a Chauvet Hurricane 2D and it crap itself earlier this week. When plugged in, Fan turns on at full but display does not work, Buttons dont change anything, nor does dmx. Any ideas? Clay
  19. W

    DMX Control Software

    Our theatre is recently updating a very outdated lighting system. We have upgraded to all new portable dimmer packs with DMX control capabilities. We bought the Chauvet Xpress 512 to utilize as a DMX interface with our computer. When I downloaded ShowXpress however, it doesn't seem to be made to...
  20. K

    Control/Dimming Chauvet Stage Designer 50: Manual Step backwards?

    Hi all I'm currently running the lights for a small-ish theater/musical show. I'm stuck with a Chauvet Stage Designer 50 for control. I works well since we only use 24 dimmer channels and traditional fixtures. The show requires some 60-80 lighting steps and I've spread them out into 20...