chauvet

Hello!I'm currently in a venue, where due to a series of unfortunate events, almost our entire inventory of QWashs has stopped working, we think due to being powered off dimmers set to non-dim. From the research I've done, it seems as if the LED drivers are what has gone one. There are two...

We have a Chauvet Hurricane 2D and it crap itself earlier this week.When plugged in, Fan turns on at full but display does not work, Buttons dont change anything, nor does dmx.Any ideas?Clay

Our theatre is recently updating a very outdated lighting system. We have upgraded to all new portable dimmer packs with DMX control capabilities. We bought the Chauvet Xpress 512 to utilize as a DMX interface with our computer. When I downloaded ShowXpress however, it doesn't seem to be made to...

Hi all I'm currently running the lights for a small-ish theater/musical show.I'm stuck with a Chauvet Stage Designer 50 for control. I works well since we only use 24 dimmer channels and traditional fixtures.The show requires some 60-80 lighting steps and I've spread them out into 20...

Hi folks,I'm hoping someone has had the same problem and can point me in the right direction.I have a Chauvet Legend 412 on which the LEDs will not light, or for lack of a better term it will not "lamp on". It responds to data and will pan, tilt and send data down the line.So far I've...

Hi all: I'm lighting a dance show in a few weeks and they need strobe lights for a couple numbers. The stage is pretty large (55' long by 43'5" deep and 31ish feet tall - although the front is a thrust)Anyway, I was wondering if anybody had any experience with the Chauvet Mini Strobe LED. Do...

I have 16 of the slimpars and i have them connected via the adj wi-fly's and when i put them on the addresses they need to be in, i noticed something weird. When it's in 3 channel mode it works fine, but when i switch to 7 channel mode, the 1st fader for the red channel turns to the green...