wiring

  1. J

    Control/Dimming DMX Wiring Leviton Board

    I have an old Leviton MC7008 board with the 5-pin DMX add-on. The wiring from the board to the back of the connector has come off though. I re-wired what I thought was the correct order, but I’m receiving no response from my dimmers. Does anyone know the PIN numbers for the wires that go to the...
  2. Palms

    RGB LED Tape DMX decoder wiring

    Hi all,I have a DMX decoder for RGB LED tape and I want to wire it up for use on a show. Its clear how the tape gets wired in but I have got a bit confused on how the power supply hooks up. There is an in for the power input clearly marked but then there is also another 'V- V-' terminal that...
  3. E

    Design Need Advice Creating Battery Operated Candelabras

    Hello, I'm a student lighting designer and I am currently designing the lights for a production that needs 4 candelabras that are brought on and off stage by actors that are battery powered and have a switch for the flames to turn on. The current set up is using 4 chandeliers that have 5 bulb...
  4. D

    Socapex wiring

    I am trying to covert a few stage pin drop boxes to socapex ends so that i do not need to haul these giant boxes up and down when tours come in. I opened the box up though and there is only one ground wire running in the cable and it is going to a bar in the box that the ground for each circuit...
  5. M

    Comm headset splitter

    I thought this would be a common question, but couldn't find anything in a search. Is there any reason building a 4pin XLR Y cable wouldn't work to put two headsets on one beltpack? I'm guessing there's plenty of power, since any headset I've used (when working properly) is capable of causing...
  6. mikeydoesstuff

    TW1 repair

    Hey friends, I took over repairing a TW1 and the two fuse boards were separated without labeling. Can anyone shoot me a photo of the top board put together properly, or a wiring diagram if you have one? All my others are on the road so I dont have one on hand for reference. Thanks
  7. Graham Zellers

    Design Need Wiring LED Help

    Hello all,My theatre has decided to put up a show in which there is a ton of individual LEDs and LED tape needed within our scenery and needs to be DMX-controllable. I am not exactly sure where to begin though I know we will have a 15' by 30' wall that breaks into 5 sections (for wall moving...
Back