x32

  1. dbaxter

    Mixers/Consoles X32 response to OSC commands

    My X32 is not responding to certain commands for setting fader levels. If I send /auxin/01/mix/fader ,f .2 the fader moves up .2 fine. If I send /auxin/01/mix/fader ,f .5, it goes halfway up. So far so good. However, sending ...,f .3 or ...,f .4, or anything greater than .2 and less than .5, the...
  2. A

    Mixers/Consoles Board Audio to Camcorder

    I'm trying to run just pastor vocals from board to Camcorder. Going to try to build mix in mixbus 5 routed to output 5 to run xlr to camera. What confuses me at this point is the routing for this. Do I go into routing in the Out 1-16 section to set this up? Or do I route mixbux 5 to an actual...
  3. L

    Mixers/Consoles I want to practice mixing with my Behringer X32. How do I do this?

    Recently we bought a Behringer X32 Console which, in the future, will be used to mix live sound. I wanted to get some practice in and test some things out but I don't know how. What I want is to get some tracks in the mixer (from a PC?). I tried connecting a PC over USB with the interface on...
  4. DannyDepac

    Behringer x32 and direct out to Camcorder

    Hey - another X32 question. I'm trying to record our musical performance and I want to use a direct out from the board to our camera. I have tried a few times over the past few days and have found that I am getting only the lead's mic which is on our first channel. I know it is probably a...
  5. Jonathan Pitzer

    Control/Dimming Wondering if I can use OSC to control lighting channels with X32

    I believe that I have seen Qlab tutorials that allow Qlab to both take and give OSC commands from both an X32 and an Ion. I was wondering if it is possible to set the X32 up as additional faders to control lighting channels like you would with an external fader wing. Or if it is possible to...
  6. dvsDave

    Mixers/Consoles X32 USB Playback Tutorial

    After much hair pulling and Googling, here's what I've found to work for playing back tracks from a USB stick on an X32 board. Most of what was tripping me up was getting the file type and settings correct. Check your X32 board. Most are defaulted to running at 48kHz, although you can set...
  7. dvsDave

    X32 Live! Webinar: Mix Buses

  8. Roma V

    New Sound System for Community Theatre

    Hi! I'm brand new to ControlBooth and looking for advice on what to buy for the youth community theatre that I work with. We're looking to get a complete sound system that does not have to rely on a venue's house system, because we generally change venues every summer and are never really sure...