SteveMcQueen
Member
Bare with me explaining how I have this set up. But I have an issue I need immediate help with.
I have a 12v battery that powers a DMX decoder. Something like this.
So DC+, DC- comes from the battery. It is powering a pendant light wired with zip cord. V+ and R go to the pendant. The pendant has 12vDC lamps in it.
With no dmx plugged in, the pendant lights up.
Please what am I missing. I use these decoders all the time, with LED tape, and have never had an issue. I have switched out different boxes in case the box was faulty... same thing.
Please, we open tonight and this was a last minute add. Thanks.
I have a 12v battery that powers a DMX decoder. Something like this.
LED DMX 512 Decoder/RDM Controller - 8 Amp 3 Channel or 6 Amp 4 Channel | Super Bright LEDs
This DMX 512 decoder/RDM controller can control up to 4 different single-color 12-24 VDC LED products, any 1 RGBW LED light bar or strip, or 1 RGB strip along with 1 additional single-color product. The decoder can run in stand-alone mode using address code switches, under DMX512 digital control...
www.superbrightleds.com
So DC+, DC- comes from the battery. It is powering a pendant light wired with zip cord. V+ and R go to the pendant. The pendant has 12vDC lamps in it.
With no dmx plugged in, the pendant lights up.
Please what am I missing. I use these decoders all the time, with LED tape, and have never had an issue. I have switched out different boxes in case the box was faulty... same thing.
Please, we open tonight and this was a last minute add. Thanks.