Adding XLR to Shure MX392

[carsonld]

I am trying to add an XLR end to my two Shure MX392s. On the cable I have a silver braid that has been unraveled, a red, black, green, orange, and white cable, and copper that was wrapped around the red and black cables. I have never seen orange, green, and white cables when messing with mics before (my knowledge on sound is limited). Can someone provide some inisght on what goes where? Ive checked the manual and it says nothing about where to connect those three extra colors.

Thanks

MX392 MX393 User Guide - Shure

The Shure small, surface-mounted electret condenser microphone series, MX392-393, user guide.

pubs.shure.com

 

[DrewE]

The green, orange, and white are used with the pilot light and switch on the microphone base, according to the manual. If you don't need to use those for anything particular, you can just ignore those wires and hook up the black, red, and copper braid.