Altman Lighting Ladder

[Eustie]

How many source four ERS can fit on Altman 4 rung lighting ladder?

How many ERS can you fit across on a single row?

 

[SteveB]

2 side by side, 8 total. Outside to outside for the incandescent S4 ellipspidal is 13 inches, while the inside of the ladder is 24. Tight fit but it’ll work, just hope the LD wants side cuts.

Also use something other than the standard iron c-clamp, Mega-Clamp is good, etc... and double safety it.

 

[RonHebbard]

2 side by side, 8 total. Outside to outside for the incandescent S4 ellipspidal is 13 inches, while the inside of the ladder is 24. Tight fit but it’ll work, just hope the LD wants side cuts.

Also use something other than the standard iron c-clamp, Mega-Clamp is good, etc... and double safety it.

@Eustie and @SteveB That's eight before you start using long boom arms off the sides with two boom T's per arm or four T's per arm, two up and two down. How silly do you want / need to be??
Toodleoo!
Ron Hebbard

 

[JonCarter]

I'm with Ron on this. You take the hardware you have and make the designer's wants work with it.