Usually wireless mics will go through a reciever which will output the signal to a 1/4" cable into your board or whatever, and
phantom power will never go to a 1/4" cable. Even in the "nutric" inputs with a 1/4" inch input inside an
XLR input if you turn
phantom power on to the chanel and have a 1/4"
plug in it, the
phantom power will not go to the 1/4" cable (only to the
XLR)
I would start out by pugging it in without
phantom power and seeing how good the signal you get into the board is. Everyone should feel free to correct me, but I dont think pluging in a mic that needs
phantom power into a
plug without
phantom power will do much harm, the worst i can see it doing is not working while the phanom
power is off. If it doesnt work without
phantom power, I would take that as a decent sign that it nees
phantom power.
I am not sure about those PVM mics, but a quick look on google might answer that (in the
manual) I would look for you, but it's getting late here and I need to catch a few winks of sleep!