Beam angle - Prospot 250 LX

I've got 4 Coemar Prospot 250 lx's. Suddenly one of them seems like it has a wider beam angle. I've never noticed it before so I'm wondering if I might have accidently changed something while I was cleaning it.
I read somewhere a while ago that there are two different beam angles for this fixture. Does anyone know how to change it?
 
It's a small world after all! We've got 4 ProSpots too. The photometric PDF I have says the standard beam angle is 15 degrees. 12 degrees and 18 degrees are options. I don't know of any way to adjust the angle that would be accidental. Surely you'd have to replace a lens somewhere.
Is it significantly wider than normal? If so, perhaps the prism effect has been knocked into the beam and become stuck.
Coemar's website. http://www.coemar.com/prodotti_dettaglio.asp?str_navigazione=%3Ca+href%3D%27prodotti.asp%27%3EProducts%3C%2Fa%3E+%7C%7C+%3Ca+href%3D%27prodotti_categoria.asp%3Fflag%3Deng%26selezione%3D%26ricerca_prodotto%3D%26cerca%3D%26numero_record%3D9%26page%3D2%26id_categorie%3D78%26str_navigazione%3D%253Ca%2Bhref%253D%2527prodotti%252Easp%2527%253EProducts%253C%252Fa%253E%2B%257C%257C%2BMoving%2BHeads%27%3EMoving+Heads%3C%2Fa%3E+%7C%7C+&id_prodotti=111&flag=eng
 
It's definitely not the prism. I suppose that I may have just not noticed it before but pretty unlikely.
It could have been the angle of my perspective, I'll check it out again tomorrow.
 

Users who are viewing this thread

Back