Ok, heres the problem. I have a 16 chanel bord, and 2 dimmer pacs, with 4 circuts on each (so a total of 8 chanels). 2 of the channels weren't working, so i checked the fueses, saw that they needed replacing, and replaced them (250v, 6.3amp, insteed of the normal 250v, 10amp).
I then hooked up the lights, fliped the circut on for the box, and the light turned on. I didn't even turn the dimmer pack on, the light just turned on by its self. I umpluged the DMX from the bord to the pack, and the light stayed on. I have 2 dimmer pacs, and the DMX signal goes from the bord to pack 1, then into pack 2. Each pack has one circut that dose that (its number 4 on the first box, and number 3 on the secound box).
Dose anyone have any idea whats wrong? Is it fixable, or do i need to get new dimmer packs?
Im at home, so im not sure the brand and/or type of dimmer pack or bord, but ill find out tommorrow at school...
Thanks so much,
Zac
I then hooked up the lights, fliped the circut on for the box, and the light turned on. I didn't even turn the dimmer pack on, the light just turned on by its self. I umpluged the DMX from the bord to the pack, and the light stayed on. I have 2 dimmer pacs, and the DMX signal goes from the bord to pack 1, then into pack 2. Each pack has one circut that dose that (its number 4 on the first box, and number 3 on the secound box).
Dose anyone have any idea whats wrong? Is it fixable, or do i need to get new dimmer packs?
Im at home, so im not sure the brand and/or type of dimmer pack or bord, but ill find out tommorrow at school...
Thanks so much,
Zac