I run an 1100 seat performance venue for our high school, and after meeting with our CFO and reviewing the budget he's asked to me to create a list which includes a rough guestimate cost and timeline for larger replacement items such as total replacement of softgoods, seats, major rigging components, consoles, etc. Our venue is only a few years old and I've got a rough idea, but I'm also a novice in terms of my experience. For those of you with older venues or venues of similar size, can you provide any input on what some of these things would cost?
I've attached my technical packet, but listed some of the major information below.
We have 30 linesets, with 5 motorized electrics, and 3 motorized ceilngs, 14 LED cyc units, 16 LED pars, and 120 various conventional fixtures. Currently running ETC Ion, Soundcraft SI Expression 3. Motorized pit lift.
Other specs:
Dimmers
192 2.4k ETC Sensor D20E Dimmers installed in ETC Sensor3 120v UL dimmer racks
ETC Sensor CEM-3 control modules are utilized in each dimmer rack
All stage pin pigtails are 2PandG
Two sets of hard two-fered Edison power available on on-stage electrics, and catwalks
One set of hard three-fered Edison power available on balcony rail
One set of hard three-fered 220v twist lock power available on 1st and 3rd electric, and 2nd catwalk
Company Switch- 40’ above SL 400 Amp 208/120V 3 Phase 60HZ- camlock
ETCNET2 Network System
Ethernet ETCNet boxes are located throughout the theatre to all possible lighting locations
Distributes DMX over Ethernet as EDMX
(4) Ethernet 2 port nodes converts Ethernet to DMX. Can be configured as inputs or outputs
Projection
Distance from projection screen (downstage of proscenium) to projector- ~76”
24’ x 30’ screen on rollup frame- front projection only- not moveable
Milky white cyclorama 67’ x 30’ (cyc line set)
Mounted LX1200 Christie Projector
- Cobranet and Audia Flex for digital patching
I've attached my technical packet, but listed some of the major information below.
We have 30 linesets, with 5 motorized electrics, and 3 motorized ceilngs, 14 LED cyc units, 16 LED pars, and 120 various conventional fixtures. Currently running ETC Ion, Soundcraft SI Expression 3. Motorized pit lift.
Other specs:
Dimmers
192 2.4k ETC Sensor D20E Dimmers installed in ETC Sensor3 120v UL dimmer racks
ETC Sensor CEM-3 control modules are utilized in each dimmer rack
All stage pin pigtails are 2PandG
Two sets of hard two-fered Edison power available on on-stage electrics, and catwalks
One set of hard three-fered Edison power available on balcony rail
One set of hard three-fered 220v twist lock power available on 1st and 3rd electric, and 2nd catwalk
Company Switch- 40’ above SL 400 Amp 208/120V 3 Phase 60HZ- camlock
ETCNET2 Network System
Ethernet ETCNet boxes are located throughout the theatre to all possible lighting locations
Distributes DMX over Ethernet as EDMX
(4) Ethernet 2 port nodes converts Ethernet to DMX. Can be configured as inputs or outputs
Projection
Distance from projection screen (downstage of proscenium) to projector- ~76”
24’ x 30’ screen on rollup frame- front projection only- not moveable
Milky white cyclorama 67’ x 30’ (cyc line set)
Mounted LX1200 Christie Projector
- Cobranet and Audia Flex for digital patching