Chauvet Colorband T3

Massey28694

Active Member
Evening all! Having some issues with a new Colorband T3 wash fixture and hope someone can point me in the right direction. Running an ETC Element 2. Patched the fixtures to the 14 channel profile, no problem. What is advertised and what I would like to do is control the "zones" and access the preprogrammed specials built into the unit. Here is a copy of the user manual. https://www.chauvetdj.com/wp-content/uploads/2016/01/COLORband_T3_USB_UM_Rev2_WO.pdf? Right now, when I turn on the 1st channel patched at full, I get all leds on and a bright white light. As many of you know, I'm new to this (somewhat anyway) and am still learning my way around. Can anyone tell me how to access those zones and specials as shown under the 14 ch profile? Much appreciated!!
 
7CCD1332-3ECC-4571-8919-A005BA4984BF.png


you gotta set the profile on the fixture as well
 
I thought we set it on the fixtures, but now I’m doubting myself. Let me check that and I’ll report back. Thank you!
 
Best place to start.
 

Users who are viewing this thread

Back