Have these c.1924 Kliegl #829 footlights http://www.klieglbros.com/catalogs/M/catmc1926p9.jpg which fold up from flush to reveal the classic incandescent foot lights.
Project Manager chose a fixture smallest and would fit, I said... just a little routing and cutting, the historic part can be saved. Thought they could be, but there is no way to fit the light short of reversing it's foot light reflectors within it. I was wrong in initial way to do it that got sold.
Tried this reverse of reflectors, it worked until something in having to reverse every reflector and re-assembling again, something internally came un-plugged and it lost most of the circuits. Boss was than... nope, Void's UL listing, put it back how it was. But this fixture fits within the light much better.... My old concept of routing out the oak flooring and framing won't work....
Next option C, remove the fixture and just install the lights on a flipped out flat plate.... last option in no room to store the flip out fixtures promissed.
I'll get the brand/type of LED footlight fixture, but they will fit if I reverse their reflectors, this within the lighting fixture mounting.
Interesting, of the antique foot light fixture in trying to dissemble it, there is no way to replace lamp sockets within it. I have never seen this before - ever! Were there a panel that comes off to access and replace it's lamp sockets, it will have made for more options. There was no access to medium screw lamp sockets short of drilling out pound rivets. Fascinating foot light.
Given the RGBW footlight is not available, and the Project Manager spent hours searching for a fixture to drop in.... Yet the fixture physically wont fit inside the floor pocket - short of reversing it's reflectors and than it will fit fine.
Can we contact the company and factory reverse the reflectors? If de-listing the UL by us reversing reflectors, can the factory do this? No' we already have bought these, we will be using what is delivered. Can we return them..... In doing what will work properly?
Like my boss and in many ways he is my best friend one short of my Wife. Just wich in a lot of time with him spent, us discussing how each other would do something, he would continue the brain trust. Lots of reasons lately the manager don't need his tech head in bidding a new project.
I don't know how I'm going to get these A-19 foot lights into flip out LED footlights yet. But the project is in my hands and already quoted for in billing.
Project Manager chose a fixture smallest and would fit, I said... just a little routing and cutting, the historic part can be saved. Thought they could be, but there is no way to fit the light short of reversing it's foot light reflectors within it. I was wrong in initial way to do it that got sold.
Tried this reverse of reflectors, it worked until something in having to reverse every reflector and re-assembling again, something internally came un-plugged and it lost most of the circuits. Boss was than... nope, Void's UL listing, put it back how it was. But this fixture fits within the light much better.... My old concept of routing out the oak flooring and framing won't work....
Next option C, remove the fixture and just install the lights on a flipped out flat plate.... last option in no room to store the flip out fixtures promissed.
I'll get the brand/type of LED footlight fixture, but they will fit if I reverse their reflectors, this within the lighting fixture mounting.
Interesting, of the antique foot light fixture in trying to dissemble it, there is no way to replace lamp sockets within it. I have never seen this before - ever! Were there a panel that comes off to access and replace it's lamp sockets, it will have made for more options. There was no access to medium screw lamp sockets short of drilling out pound rivets. Fascinating foot light.
Given the RGBW footlight is not available, and the Project Manager spent hours searching for a fixture to drop in.... Yet the fixture physically wont fit inside the floor pocket - short of reversing it's reflectors and than it will fit fine.
Can we contact the company and factory reverse the reflectors? If de-listing the UL by us reversing reflectors, can the factory do this? No' we already have bought these, we will be using what is delivered. Can we return them..... In doing what will work properly?
Like my boss and in many ways he is my best friend one short of my Wife. Just wich in a lot of time with him spent, us discussing how each other would do something, he would continue the brain trust. Lots of reasons lately the manager don't need his tech head in bidding a new project.
I don't know how I'm going to get these A-19 foot lights into flip out LED footlights yet. But the project is in my hands and already quoted for in billing.