Jason M Wagner
Member
I've been troubleshooting adding a new FreeSpeak II system into our 2-wire ClearCom partyline system, but having issues. The 10-ohm ground resistor in our 704 power supply keeps popping, so we need to figure that out. Leaving the PS-704 out of the system, I'm setting up the FSii as the power supply, but I'm running into another problem. When I plug in belt packs and speaker panels, everything is fine, but when I add the RM-704 remote station, the power indicator lights on the back of the FSii turn off and the nulling button grays out in the CCM. Something about the RM-704 is screwing with the 30V power from the FSii. Any ideas?
Yes, power is enable for the channels I'm using.
Yes, termination is turned on.
Yes, I've checked patching cables, but no, I have not fully checked building cabling.
Yes, power is enable for the channels I'm using.
Yes, termination is turned on.
Yes, I've checked patching cables, but no, I have not fully checked building cabling.