The above Ad will no longer appear after you Sign Up for Free!

ClearCom Mods

Discussion in 'New Member Board' started by therobdenton, May 12, 2009.

  1. therobdenton

    therobdenton Member

    Likes Received:
    Hi All,
    I came to this forum looking for the pin assignments for clearcoms. I want to build an interface that will let me switch between my sound console phone out + talkback to clear-com operation. It would also be neat to be able to send a mix from my board out through clearcom for program sound. Any ideas?
  2. cprted

    cprted Active Member

    Likes Received:
    BC, Canada
    Most clear com main stations have this feature built in. Run a line from the Talkback out on the main station into a channel on the console and Bob's you uncle. This feature is really intended more for SMs. If I were mixing a show, I wouldn't want to have to have cans on just to use the talkback mic.

    All you need to do is run a line from an aux out on your console to the program sound in on the clear com main station.
    Last edited: May 12, 2009
  3. Spiceboy

    Spiceboy Member

    Likes Received:
    SF Bay Area
    The only issue with using the Prog input on the Clearcom MS is that it is Mono.

    If you need a stereo feed then you may need to take a look at something like this


Share This Page