We have some pretty up to date equipment, our ligth board is am
ETC Expression 3x (but we have just ordered the horizon
system) and our sound board is an
Allen and Heath, not quite sure what the model is on that one but it is only a couple of years old. We have several source fours and are starting to get into the intelligent lighting that can go with them. The tools in our shop are lacking though we have older than dirt tools like out disk sander and band saw. We also need new lighing in the shop, we still have murcury vapor lights so we cant paint in the shop because the colors dont look right. Our
house is fairly small compares to most theatres its is aroud 500 or so. and we have 32 linesets. We have 4 electrics and a VERY Large wrap around
cyc whis we watch movies on with our digital
projector when we have nothing going on. We have a double light beam at the front of
house (1 beam above another) ans wel as
ante pro positions both in front (right above the pit) and behind the beam. We are building a new position right above the sound booth which is where we will most likley hang our 10 degree source fours. We also have some side lighting positions.
RJ
Rock Springs Wy.