ColorSource PAR beam and field angles

BillConnerFASTC

Well-Known Member
I'm going to try the Rosco Opti-Sculpt filter material on a bunch of new CS PARs. Can get fifteen 7.5x7.5 frames from one 24x40 sheet.
And they have a series of oval beams as well as round.
 
This is more am I reading this right but for instance is the field angle of a CS PAR with an SELLW-7.5 (the Selador wide lens material cut for the CS PAR) 76 degrees? Extra wide aka XWFL 100 degrees?

Just lost some confidence in reading the ETC chart.

Did find this: https://community.etcconnect.com/et...56/colorsource-par-secondary-lens-beam-angles

Using nearly 100 of them for house lights, and trying to assign lenses.

Link to the App:

https://www.etcconnect.com/Support/Apps/Lighting-Fixtures.aspx

upload_2019-8-21_12-14-44.png
 
I got it. Thanks. Took me a while but works better than spread sheet once figured it out. Probably will ask for some extras in case I was off on a few of the 95 fixtures.
 

Users who are viewing this thread

Back