Converting Telex BP-2000 to Clear Com - need manual

[EmilBarnabas]

I got a deal on six Telex BP-2000 dual channel intercom belt packs. I need to convert them to ClearCom. I found the manual that works for three of them with the Gold label, but the circuit board is different for the three with the White label.

I find the same BP-2000 manual all over the Internet, but can not find the one for the version I have.

The manual I have, at the bottom of page 2, says "38109-709 Rev A 10/97"
I need a different one, probably Rev B?
The circuit board is similar to the BP-2002, but not close enough to be able to switch all the switches and jump the right jumpers.

Does anyone have a copy of the non-Rev A manual for the Telex BP-2000?
Thanks

 

[themuzicman]

I've found at least 6 different manuals for BP-2002's and only a single one for a BP-2000. Could it possibly be one of those 2002 variants?

 

[EmilBarnabas]

The circuit board diagram with the position of the switches and jumpers looks more like the BP-2002 than the early BP-2000, but it is still different enough to where I can't tell which switch to switch.

 

[Tech Doc]

https://www.manualslib.com/manual/169561/Telex-Audiocom-Bp-2000.html?page=11#manual
Manual BP-2000
I had many of these in my broadcast ops till went all RTS. Telex is Balanced audio, Clear Com is Un-Balanced audio. You may find the Telex line converter on E-Bay, that was for converting channels in bulk though. Their IFB box came configured for RTS TW.