Alex Snyder
New Member
We've recently switched over from an old Horizon Marquee system to qlab to handle our lighting needs. I'm running through an ArtNet controller to 5 pin DMX to a wall panel that handles the dimming (not sure on brand or anything else about it) All of the lights use the 3 pin stage plugs. The only thing that isn't working is the cyc lights. They're our highest addressed lights but I'm not sure if that makes a difference. They worked fine when using the old console. After I switched to the artnet interface they started to flicker, however, when I switched back to the console they would work fine. Now they flicker between both systems. There are 14 addresses assigned to our cyc dimmers. They are using convention bulbs, not LED. We have a performance in a few days so any help would be nice.