We're building a dante network between two venues and a broadcast room. We are having trouble seeing the board furthest from the broadcast. It seems like it works intermittently. I can ping all the devices from anywhere on the network. I subscribed some channels from the far board to the broadcast and they still worked, despite dante controller not being able to see it.
The network topology is very flat. Everything is on the same subnet and there are only 3 switch hops between buildings. The run goes over fiber between the buildings. What would cause the controller to fail from discovering the devices? A lot of the time when it does list all of the devices, information about the device will be unpopulated.
My thought is leaning towards something in the network filtering certain ports. That would explain why the audio is being passed (if it gets the chance to successfully subscribe) but other info about the devices is blocked? Anyone had this problem?
The network topology is very flat. Everything is on the same subnet and there are only 3 switch hops between buildings. The run goes over fiber between the buildings. What would cause the controller to fail from discovering the devices? A lot of the time when it does list all of the devices, information about the device will be unpopulated.
My thought is leaning towards something in the network filtering certain ports. That would explain why the audio is being passed (if it gets the chance to successfully subscribe) but other info about the devices is blocked? Anyone had this problem?