Outboard Gear DBX900-series card dimensions

[gordonmcleod]

I was wondering if anyone had the dimmensions for the cards that fit the DBX900 serries frames and the exact location of the edge strip
I want to design a specialty card that would have to fit one of them
thanks in advance

 

[Chris15]

The 900 series have been discontinued for a couple of years now, is making a custom card wise?

I have access to both cards and frames so if you need further dimensions, let me know...

Face plate 37.5 x 132.5 x1.8ish
Main board 114 x 231
Edge connector 62 x 9
Connector starts 12mm down from top, 15 contacts, 2.5 wide, centre of 1st track is 3mm from top, then 4mm spacing


If you want to drop me a line, I might be able to see about sending you a board photocopy or the like if needed...