DF-50 Diffusion hazer sticks

Bartonrc

New Member
My hazer sometimes sticks as if it’s not getting enough wattage. I know the wattage is fine. Is there something else that I’m missing?
 
I don't see many problems with DF-50s if the proper fluid is used. The compressor motor will need a higher current to start than when it is running. If it can not draw the current to start then it will stall which is bad. I would use a dedicated circuit and no light-duty extension cords. If it continues to not start with a circuit known to be adequate then you might need to have it serviced.
 

Users who are viewing this thread

Back