The above Ad will no longer appear after you Sign Up for Free!

dj mixer

Discussion in 'Sound, Music, and Intercom' started by dj_illusions, Oct 22, 2007.

  1. dj_illusions

    dj_illusions Active Member

    Likes Received:
    Melbourne, Australia
    hey guys,

    hopefully someone can shed some light on this problem. my friend has a small dj set up, 2 turntables, cd player and fx pad.

    he just got 2 new citronic turntables, they are running into a behringer dj mixer - when 1 turntable is plugged in with ground cable it works fine, when both are plugged in you can hear it but with the fader at full it is barely audible on both. when you plug the turntables direct into the fx pad they both work fine.

    does anyone know what the deal is? i tried jumping the ground cables to the two mixers and then just running a ground to 1 channel but still had the same problem.... very strange!!


    SHARYNF Well-Known Member

    Likes Received:
    Some Behringer units have a push button switch for line vs phono. It depends on the turn table if it sends out a Turntable level signal to set at phono or a line level signal

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice