The above Ad will no longer appear after you Sign Up for Free!

DMX Control with ETC Express

Discussion in 'Lighting and Electrics' started by brozeph20, Jan 16, 2009.

  1. brozeph20

    brozeph20 Member

    Messages:
    43
    Likes Received:
    0
    Does anyone know of a low cost dmx controller that I can hook up to my ETC Express 72/144 to position and set up my moving lights. I want it to affect the levels on the main board so that when I record a cue (on the Express), it saves the settings/position for the light. I can only use it if the levels are usable with normal cues for a show.
    Thanks
     
  2. jmabray

    jmabray Active Member

    Messages:
    546
    Likes Received:
    49
    Location:
    Dallas, Texas
    Short version is, no, and it can't be done.
     
  3. TimMiller

    TimMiller Well-Known Member

    Messages:
    1,293
    Likes Received:
    82
    Location:
    Houston, Tx
    just use the express to program the lights. You will be using the same number of channels either way if you could actually attach a console to the express. The express does not have a dmx in so what you want to do cannot be done.
     
  4. Esoteric

    Esoteric Well-Known Member

    Messages:
    1,556
    Likes Received:
    59
    Location:
    Dallas, TX
    Yeah, its not that hard programming MLs on an Express.

    Mike
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice