DMX controlled switch?

[danTt]

Hi friends,

Not sure if I'm just channeling my inner dumb, or overcomplicating things, but I'm in a situation where having a switch I could trigger over dmx would be great. I know I could use an arduino or rPI, but something premade might be better in this case. Any ideas? Google has been letting me down :/

 

[dbaxter]

Take a look at Northlight Systems.

 

[derekleffew]

What are you desiring to switch? The gold standard: http://www.dfd.com/1r20.html .

 

[rsmentele]

Or ETC's CSR-D might work too

http://www.fullcompass.com/prod/503929-ETC-Elec-Theatre-Controls-CSR-D

 

[danTt]

It's low voltage, I was working on a project to trigger a tele-q wirelessly. Ended up rethinking the wiring and I'm just triggering from a showdmx dimmer now. Thanks for the suggestions though.

 

[kicknargel]

I know you've solved it, but wanted to point out that we've used a "DMX Decoder" for LED tape light as a low-volatage relay. It's really just a 3- or 4- channel 12V dimmer, and can be had for $50 or so.