ResilientRosie
Member
This is probably something really dumb causing the issue, but could someone please help?
We had a rental in our theatre this morning and the LD/ME unplugged the DMX512 from our lightboard to use his board. After the show I plugged it back in and I now have no control. We're running an ETC Ion through a Net3 4-port gateway with 3 universes. The gateway is flashing indicating that it's not receiving signal. I reset the dimmer racks and they all read "No data from port A" or "No data from port B". I checked the connections and they are all completely seated and plugged correctly.
What is wrong here? I have a show in the early morning and I'm desperate. Could someone please let me know what I'm missing? Thank you!
We had a rental in our theatre this morning and the LD/ME unplugged the DMX512 from our lightboard to use his board. After the show I plugged it back in and I now have no control. We're running an ETC Ion through a Net3 4-port gateway with 3 universes. The gateway is flashing indicating that it's not receiving signal. I reset the dimmer racks and they all read "No data from port A" or "No data from port B". I checked the connections and they are all completely seated and plugged correctly.
What is wrong here? I have a show in the early morning and I'm desperate. Could someone please let me know what I'm missing? Thank you!