Doug Fleenor Design Introduces Two New Products

jfleenor

Well-Known Member
Doug Fleenor Design is proud to announce the addition of two new products which will debut at LDI 2018. Please stop by our booth, #839, to see them in person!

The PRE10E-A is an Ethernet based lighting controller that fits entirely into a two-gang electrical back box. The simple user interface consists of ten illuminated buttons for scene selection and two recessed "paperclip" buttons for scene capture. Initial set-up is simplified by use of an encoder wheel and 1.25 inch screen on the back of the unit.

The controller stores up to ten scenes, each with up to 2048 channels (4 universes) of lighting data. Fade times are adjustable from zero to 999 seconds (default is 2 seconds). Multiple controllers can reside on the same network either as completely independent devices (each supporting 4 unique universes) or as main/remote devices (controlling the same 4 universes). Powered by PoE or a separate low voltage supply. MSRP: $980.00

The E8ANL-DIN is an Ethernet (sACN or ArtNet) interface with 8 analog (0-10V) outputs (each with its own common terminal) and a DMX512 output. Configuration is via a built-in webserver. The standard Ethernet connector (8P8C aka RJ-45) accepts PoE (power over Ethernet) or the user may supply power (18 to 48 VDC) on a two-position terminal block. DMX512 and analog connections are on pluggable Phoenix terminal blocks. The device mounts on standard 35mm “top hat” DIN rail. MSRP: $809.00

The ship date for both products is October 1st, 2018.
 

Attachments

  • New Products October 1 2018 Pricing.pdf
    358 KB · Views: 34

Users who are viewing this thread

Back