idio1tg3niou5
Member
Hey all,
I know that these fixtures are quite new and I can't find any info on them yet so I thought I would post here and see if the CB hive mind could help.
I have six Elation Fuze Par Pro z120s that are IP rated for outdoor use, as we are an outdoor theater. They are addressed to 50, 60, 70, 80, 90, and 100 set to 10chn 16bit. All menu functions in each fixture have been set to be the same from one to the next. Address 60, the second in the line is being a little. Weird.
Its color continually gets off. It wants to be a more saturated variation of whatever color its supposed to be. When we power on into the first look it looks correct, and loses itself within the first color change or so.
Any ideas? is this a manufacturer issue?
Thanks for the help!
I know that these fixtures are quite new and I can't find any info on them yet so I thought I would post here and see if the CB hive mind could help.
I have six Elation Fuze Par Pro z120s that are IP rated for outdoor use, as we are an outdoor theater. They are addressed to 50, 60, 70, 80, 90, and 100 set to 10chn 16bit. All menu functions in each fixture have been set to be the same from one to the next. Address 60, the second in the line is being a little. Weird.
Its color continually gets off. It wants to be a more saturated variation of whatever color its supposed to be. When we power on into the first look it looks correct, and loses itself within the first color change or so.
Any ideas? is this a manufacturer issue?
Thanks for the help!