ETC ION Go Button faders re assignment

[NickVon]

I have a I-Cue tracking move cue. Is it possible to reassign the Faders over the GO button that usually take control of the up/down intensity fade for manual timing execution and configure them to operate a "Focus" timing in stead. Is it possible to do on a cue by cue basis?

 

[aeh20s]

Is there a reason that you aren't doing that with discrete timing in the cues?

 

[NickVon]

I have discrete timings set. Though the Master faders don't take manual control of the "focus" timing of the cue. Only up/down fade. I'd like to keep the focus time manual tro account for the performers variation.

 

[ScottT]

"Cue X Focus Time Manual #" should do it.

Manual is a softkey

 

[danTt]

"Cue X Focus Time Manual #" should do it.

Manual is a softkey

View attachment 24107

On the ion you'll have to manually bring the faders down and then the timing will respond to bringing them back up.

 

[NickVon]

This was it thank you!!!

Ironicly we opted for a different work around. We instead set the left master fader to become a "rate" master. So the operator just adjusts it up or down past the 50% "home" position and that is working pretty well.

As executing 3 quick move cues and resetting the fader back down between each actually was more error prone when practicing with the students.