Control/Dimming ETC Paradigm and OSC

Paradigm can send/receive UDP strings. That being said, paradigm is not designed in such a way that the end user can easily make changes to the interface/adaptations for specific shows. If you had a static setup that you did not anticipate changing you could talk with your friendly local dealer and they should be able to help you create such an interface.
 
Ditto Dan's comment and note that what you are actually asking is for a device running OSC to be sending commands to Paradigm as well as thru Paradigm to an audio system. With the end result being using a tablet or some such to control lighting and audio.

This would likely require the services of a Paradigm tech spending many hours to create the assorted commands in Paradigm to receive OSC and act on these commands (if it does this). Note that Paradigm is typically running 24/7 so doesn't need to be activated/powered up the way a lighting or audio console needs. Typically to interface lighting and audio systems you use Midi, but this would require that the audio system be operational 24/7 as well.

You can certainly create configurations in Paradigm that allows changes in lighting, usually it's a case of running up levels, then recording those changes to specific presets allocated for daily use.

Big question is how much money 'ya got to make this happen as it won't be cheap.
 

Users who are viewing this thread

Back