ETC S4 Ellipsoidal Question

[len]

Anyone have the part # for the ETC lamp assembly? I need the whole back cap assembly, cord set, etc. ETC is unresponsive.

 

[derekleffew]

Link to Production Advantage, Catalog# INPT-0191:

Socket Assembly Cap, to 750W, Source Four

Also available from any other ETC dealer, I'm sure. As above, the ETC part# for Lamp Socket Assembly is 7060A2008.

 

[shiben]

Whats wrong with it that you cant rebuild it?

 

[Footer]

Whats wrong with it that you cant rebuild it?

Probably fell off a truck. You would be surprised how quickly these things get lost.

 

[shiben]

Probably fell off a truck. You would be surprised how quickly these things get lost.

Ah, a problem I have yet to face...

 

[starksk]

Len,

Sorry that you didn't get a response from us. Judging by the time stamp of this post, you may have hit our after hours emergency line.

Anywho, here is the assembly guide (as posted on our website) that has all of the part numbers for the Source Four.

http://www.etcconnect.com/docs/docs_downloads/techdocs/S4_Assembly_Guide_UL_2006-01_revA.pdf

If there is anything we can do to help, please let me know.

 

[len]

Len,

Sorry that you didn't get a response from us. Judging by the time stamp of this post, you may have hit our after hours emergency line.

Anywho, here is the assembly guide (as posted on our website) that has all of the part numbers for the Source Four.

http://www.etcconnect.com/docs/docs_downloads/techdocs/S4_Assembly_Guide_UL_2006-01_revA.pdf

If there is anything we can do to help, please let me know.

I sent an e-mail a few weeks ago and this just fell through the cracks. It could be the address I had is bad.

As to why I need one, I always find ellipsoidal parts for cheap (pawn shops, ebay, etc.), so I buy them when I can. I have numerous shutter assemblies and reflector housings, but need end caps and lenses for them. I thot I found an end cap for $15, but it was the wrong part # and no photo, so I passed.