Smatticus
Active Member
For Sale: 3x ETC Custom Connector Strips with Optional Type 26 Hanging Brackets
Located in Norwich, NY 13815
These connector strips were purchased for a project which was then re-designed; they have never been installed or used. The strips were intended to power an all-LED lighting rig. These would be great for a lighting system upgrade/renovation or for power distribution in a shop space. Or, maybe you’ve always wanted an ETC raceway in your garage or your (very large) living room? ;-)
All the connector strips have NEMA 5-20 panel-mount plugs (aka "Edison" or "Parallel Blade/Ground"). Each connector strip has one Ethernet pass-thru jack. Further details below.
Item A - ETC Model #9940-(14AO/7)(1N)-R Connector Strip
40 feet long
7x Circuits numbered 1-7
2x NEMA 5-20 Plugs per circuit, laid out in consecutive pairs
(1 1 2 2 3 3 4 4 5 5 6 6 7 N 7)
1 Network pass-thru jack located between the circuit #7 plugs (N)
Detail drawing available at this link: See Connector Strip # (1) in Circuit Designation chart
$700 plus freight (Per ETC's data, the weight is approximately 160-200lbs)
Item B - ETC Model #9940-(14AO/7)(1N)-R Connector Strip
40 feet long
7x Circuits numbered 8-14
2x NEMA 5-20 Plugs per circuit, laid out in consecutive pairs
(8 8 9 9 10 10 11 11 12 12 13 13 14 N 14)
1 Network pass-thru jack located between the circuit #14 plugs (N)
Detail drawing available at this link: See Connector Strip # (2) in Circuit Designation chart
$700 plus freight (Per ETC's data, the weight is approximately 160-200lbs)
Item C - ETC Model #9950-(12AO/4)(1N)-L Connector Strip
50 feet long
4x Circuits numbered 29-32
3x NEMA 5-20 Plugs per circuit, laid out in consecutive triplets
(29 N 29 29 30 30 30 31 31 31 32 32 32)
1 Network pass-thru jack located between the first two #29 plugs (N)
Detail drawing available at this link: See Connector Strip # (1) in Circuit Designation chart
Photo of as-built strip at this link: this accordion-style packaging is typical of all long ETC connector strips, installation instructions are provided by ETC
$700 plus freight (Per ETC's data, the weight is approximately 200-250lbs)
Item D – ETC Type 26 Double-Pipe Hanger Bracket
For rigging system suspension in a pipe-over-pipe configuration
23x Available
$25 each plus freight
Approximately 9lbs each
ETC recommends 5ft spacing of connector strip supports
Photo of bracket in use at this link
For further details concerning ETC's Connector Strips
download their spec sheet or see the documentation on their website
Payment must be received before shipping
Located in Norwich, NY 13815
These connector strips were purchased for a project which was then re-designed; they have never been installed or used. The strips were intended to power an all-LED lighting rig. These would be great for a lighting system upgrade/renovation or for power distribution in a shop space. Or, maybe you’ve always wanted an ETC raceway in your garage or your (very large) living room? ;-)
All the connector strips have NEMA 5-20 panel-mount plugs (aka "Edison" or "Parallel Blade/Ground"). Each connector strip has one Ethernet pass-thru jack. Further details below.
Item A - ETC Model #9940-(14AO/7)(1N)-R Connector Strip
40 feet long
7x Circuits numbered 1-7
2x NEMA 5-20 Plugs per circuit, laid out in consecutive pairs
(1 1 2 2 3 3 4 4 5 5 6 6 7 N 7)
1 Network pass-thru jack located between the circuit #7 plugs (N)
Detail drawing available at this link: See Connector Strip # (1) in Circuit Designation chart
$700 plus freight (Per ETC's data, the weight is approximately 160-200lbs)
Item B - ETC Model #9940-(14AO/7)(1N)-R Connector Strip
40 feet long
7x Circuits numbered 8-14
2x NEMA 5-20 Plugs per circuit, laid out in consecutive pairs
(8 8 9 9 10 10 11 11 12 12 13 13 14 N 14)
1 Network pass-thru jack located between the circuit #14 plugs (N)
Detail drawing available at this link: See Connector Strip # (2) in Circuit Designation chart
$700 plus freight (Per ETC's data, the weight is approximately 160-200lbs)
Item C - ETC Model #9950-(12AO/4)(1N)-L Connector Strip
50 feet long
4x Circuits numbered 29-32
3x NEMA 5-20 Plugs per circuit, laid out in consecutive triplets
(29 N 29 29 30 30 30 31 31 31 32 32 32)
1 Network pass-thru jack located between the first two #29 plugs (N)
Detail drawing available at this link: See Connector Strip # (1) in Circuit Designation chart
Photo of as-built strip at this link: this accordion-style packaging is typical of all long ETC connector strips, installation instructions are provided by ETC
$700 plus freight (Per ETC's data, the weight is approximately 200-250lbs)
Item D – ETC Type 26 Double-Pipe Hanger Bracket
For rigging system suspension in a pipe-over-pipe configuration
23x Available
$25 each plus freight
Approximately 9lbs each
ETC recommends 5ft spacing of connector strip supports
Photo of bracket in use at this link
For further details concerning ETC's Connector Strips
download their spec sheet or see the documentation on their website
Payment must be received before shipping
