FS/FT: Miscellaneous Sound & Lighting Equipment

JJBerman

Active Member
Did some Winter "Spring" Cleaning this weekend and found some stuff I no longer need to keep laying around.
Everything is plus shipping (If you are within ~3hrs of Madison WI I'm open to delivering personally with a tour of your local theatre).
Everything is As Is, but was fully functional when removed from service between 2020 and 2021.
Photos can be viewed on Google Drive here.
If the item is right, I am open to offers.
  • Lighting
    • (qty 1) ($75) ETC Net2 4 port Node Rack Mount
      • 1i 3o with 6pin RFU/ETC Link
    • (qty 7) ($50 ea) ETC Net2 4 port Node Wall Mount
    • (qty 2) ($75 ea) ETC Net2 4 port Node Portable
    • (qty 12) ($40 ea) ETC Net2 2 port Node Wall Mount/Portable
      • Includes Portable Back Box & 1ft Ethernet Cable & detached Hanging Bracket
      • All were used as wall mount originally. Then some were swapped to portable as the installed system upgraded to Net3.
      • Serial Numbers available upon request
      • I also have a handful of units that are missing their display contrast chip. They should still input/output DMX but without a display. Make an offer if interested.
    • (qty 1) ($30) ETC Legacy Unison Switch Interface
      • Includes 2u Rack Mount with cover
    • (qty 1) ($30) ETC Legacy Unison Contact Interface
      • Includes Wall mount box
      • New, never used
    • (qty 1) ($50) ETC Legacy Unison Portable Touchscreen
      • 15 foot cable built on. Includes additional 25 foot extension cable
    • (qty 6) (free) 6" by 6.25" DMX Output Plate
    • (qty 1) (free) 1 gang DMX Output Plate
    • (qty 2) (free) 2 gang DMX Input + Unison "House" input
  • Sound
    • (qty 2) ($75 ea) Peavey Media Matrix X-Frame 88 DSP
      • Includes IEC Power Cable and 24 three-position modular connectors (no missing connectors)
        Includes X-Frame 99 Software v2.3e & DB9 RS232 Serial Cable with Belkin USB to DB9 adapter (F5U409)
        Serial Number: 50981665
      • Includes IEC Power Cable and 16 three-position modular connectors (8 missing connectors)
        Serial Number: 50257300
    • (qty 1) ($35) Peavey Media Matrix MM8802 Break Out Box
      • Includes IEC Power Cable and 10 three-position modular connectors (6 missing three-position connectors).
        Includes 2 16-pin modular connectors for CV in/TTL out.
        Serial Number: 50243610
    • (qty 1) ($20) Pioneer Stereo Headphones SE-305
      • Open Box Barely if ever used
  • Miscellaneous
 
Sold some lighting stuff, here is the updated lighting list.
  • Lighting
    • (qty 1) ($75) ETC Net2 4 port Node Rack Mount
      • 1i 3o with 6pin RFU/ETC Link
    • (qty 7) ($50 ea) ETC Net2 4 port Node Wall Mount
    • (qty 2) ($75 ea) ETC Net2 4 port Node Portable
    • (qty 12) ($40 ea) ETC Net2 2 port Node Wall Mount/Portable
      • Includes Portable Back Box & 1ft Ethernet Cable & detached Hanging Bracket
      • All were used as wall mount originally. Then some were swapped to portable as the installed system upgraded to Net3.
      • Serial Numbers available upon request
      • I also have a handful of units that are missing their display contrast chip. They should still input/output DMX but without a display. Make an offer if interested.
    • (qty 1) ($30) ETC Legacy Unison Switch Interface
      • Includes 2u Rack Mount with cover
    • SOLD (qty 1) ($30) ETC Legacy Unison Contact Interface
      • Includes Wall mount box
      • New, never used
    • SOLD (qty 1) ($50) ETC Legacy Unison Portable Touchscreen
      • 15 foot cable built on. Includes additional 25 foot extension cable
    • SOLD (qty 6) (free) 6" by 6.25" DMX Output Plate
    • SOLD (qty 1) (free) 1 gang DMX Output Plate
    • SOLD (qty 2) (free) 2 gang DMX Input + Unison "House" input
 
Last(ish) Call.
I added this stuff to Facebook today in hopes of getting a bit more of this stuff gone.
I'll likely start recycling unsold items the 1st week of February.
 

Users who are viewing this thread

Back