Gobos for HES Lonestar

[Primo109]

Does anyone know if the gobos in the ETC/HES Lonestars are replaceable? I haven't been able to find anything in the documentation that indicates you can, but several trustworthy lighting sites I've seen the lights featured on says they are swappable.

 

[cbrandt]

The rotating gobos are all swappable, although they are tiny. It takes some pretty good dexterity to get them in and out of there.

 

[Primo109]

The rotating gobos are all swappable, although they are tiny. It takes some pretty good dexterity to get them in and out of there.

Gotcha, thanks! Do you know where I would be able to find the right size gobos for the unit, or is that something I'd have to custom order from Rosco or Apollo? I found the size in the documentation, but haven't found them anywhere

 

[cbrandt]

I don't know that anyone would carry those as a standard. I always order from @Kelite when I need custom gobos (or standard patterns not included in the fixture).

 

[Primo109]

I don't know that anyone would carry those as a standard. I always order from @Kelite when I need custom gobos (or standard patterns not included in the fixture).

Gotcha, that makes sense. I'll give them a try, thanks!

 

[Kelite]

Sorry to be so late to the discussion, @cbrandt and @Primo109, got caught up in some projects.
Unfortunately, the LoneStar uses a very small gobo with a 13mm image area. While a gobo that small can physically be made, the results don't project well. Apollo draws the line for tiny images at 15mm. Perhaps another maker can assist your needs.

Oh, and happy Valentines Day everyone!