davereynolds
Member
Hi guys,
SO here is the deal, my small college theatre recently upgraded to add some automated lighting including SeaChangers, Iris's and 2 I Cues...
So i opened my I Cues and hooked them and an Iris up directly to my board, all was wonderful. This past weekend, I hung 1 I Cue in my grid, along with the Iris and hooked it up to my board (Insight 3) in the exact same fashion that I had it before...only now the I CUE will only pan, not tilt.
So, like i said i have control over the pan, not the tilt, and the Iris is working properly, so it seems to me that the DMX signal is functioning correctly, but not sure whats up with that **** tilt.
I have now moved the ICUE right next to the tech table and hooked it up with very short runs of cables and am experiencing the same problem.
Thoughts???
Thanks all!
SO here is the deal, my small college theatre recently upgraded to add some automated lighting including SeaChangers, Iris's and 2 I Cues...
So i opened my I Cues and hooked them and an Iris up directly to my board, all was wonderful. This past weekend, I hung 1 I Cue in my grid, along with the Iris and hooked it up to my board (Insight 3) in the exact same fashion that I had it before...only now the I CUE will only pan, not tilt.
So, like i said i have control over the pan, not the tilt, and the Iris is working properly, so it seems to me that the DMX signal is functioning correctly, but not sure whats up with that **** tilt.
I have now moved the ICUE right next to the tech table and hooked it up with very short runs of cables and am experiencing the same problem.
Thoughts???
Thanks all!