Are you referring to the default home position of the
fixture in LJ or in the offline
visualizer?
Most fixtures will default to (0, 0) such as High End,
Clay Paky, ADJ,
etc. However,
Martin fixtures will default to the upper lefthand corner of the movement
grid. I don't know why they do it that way, but they do. The easiest way to change this is, select the fixtures, open the movement window, reset the movement to (0, 0), which can be done by clicking the center
button between the four arrows, and then going into the Setup Menu, selecting Preferences, then Default
DMX output, then Use
Current Scene.
If it's in the
visualizer, it is possible to change the orientation of a
fixture. Left click on that
fixture so that it is red. Then hit the Alt and Enter keys. That will open a window with position options and
fixture orientation. You'll see an X, Y, and Z window. Getting a
fixture in position the way you want it will take some trial and error.
To reposition a
fixture within the scene, left click on it. Then hold the Alt key down and move it into position with your
mouse.
Let me know if you have any other questions. For additional help you can try the help file (which isn't as bad as some people claim, it's just a little hard to find everything) and also go to
http://www.ukslc.org/Technical_Articles/Monthly_Features.html