Ok, I need to light a band concert in a few weeks and I need some pointers. First of all, i can't use any lights from my normal FOH positon since the light is to low and will get in the performers eyes when they try to look at the conductor. Because of this I'm going to run my front light off my FOH 2 position, which is a bit higher. The problem with this was that we originally put the lights up there to store them, and later decided that we might as well wire them in, just in cause we ever need them. It is all S4, alternating 50-36-50-36-50-36-26-50-36-26, wired in by light type. I have 2 FOH side beams, on it I have 2 reds, 2 blue's, and 2 ungelled's to help pop people out of the background (this on each side, so 4 of each total). I no longer have a rear position as that truss got taken down. I also have side positions that are mounted higher up that I think I am going to use to give top light and help them read their music stands.
any suggestions as to how to mix it and everything? i'm not going to buy any gels, just use what we have from our stock, i'll proubly use soft blue and amber to give everyone a little color.
--zac
any suggestions as to how to mix it and everything? i'm not going to buy any gels, just use what we have from our stock, i'll proubly use soft blue and amber to give everyone a little color.
--zac