I have two Chauvet Vue 1.1 LED lights hooked up to a DMX 40 with some Chauvet Omega 1's. I've verified that all the lights work, all the DMX addressing is correct, and that individually I can control all the lights. Here's the odd thing...
Light two, channel 3 (DMX 33) looks like it's in auto mode due to the fact that it keeps flashing through it's routine. If I take control of channel three and run through the R,G,B sliders I can get it to stop blinking. As soon as I take off the manual control though it goes back to blinking through the routine. Oddly enough though if I go into programming mode I can make it stop blinking, switch to another light and it will stay off
Light six, channel 7 (DMX 97) turns on and goes dark until I activate it manually. Everything functions normally, I switch manual control off and the light goes dark again.
Can anyone tell me what would cause this to happen or what makes them do this? All other dip switches are set to off, the lights appear to be identical and configured the same in every way.
Light two, channel 3 (DMX 33) looks like it's in auto mode due to the fact that it keeps flashing through it's routine. If I take control of channel three and run through the R,G,B sliders I can get it to stop blinking. As soon as I take off the manual control though it goes back to blinking through the routine. Oddly enough though if I go into programming mode I can make it stop blinking, switch to another light and it will stay off
Light six, channel 7 (DMX 97) turns on and goes dark until I activate it manually. Everything functions normally, I switch manual control off and the light goes dark again.
Can anyone tell me what would cause this to happen or what makes them do this? All other dip switches are set to off, the lights appear to be identical and configured the same in every way.