Disclaimer: I'm an amateur and this was my first attempt a lighting - I also do audio. I work with a community theater that performs in a church that has no permanent theatrical lighting so we have to set up light trees at the back of the house which is about 90 feet to the back of the stage. We cannot install lights anywhere else other than 4-5 feet in front of the stage at a max height of 3 feet. We just finished a performance of Oliver! At the back we used two light trees each with 3 par 64s and two follow spots. In the front we used 5 Elation DLED Bricks for washes and foot lighting. We are controlling everything with a PC program called Light Factory that works pretty well.
What can we do to improve the lighting that the par 64s give us? We have a small budget. Would some old 360Q 6X22s work? 19 degree Source 4s? The 10 degrees are very expensive and I suspect very heavy.
Thanks
What can we do to improve the lighting that the par 64s give us? We have a small budget. Would some old 360Q 6X22s work? 19 degree Source 4s? The 10 degrees are very expensive and I suspect very heavy.
Thanks