The above Ad will no longer appear after you Sign Up for Free!

Making Female / Male 3.5mm Stereo Jacks

Discussion in 'Sound, Music, and Intercom' started by SketchyCroftPpl, Nov 19, 2005.

  1. SketchyCroftPpl

    SketchyCroftPpl Active Member

    Messages:
    519
    Likes Received:
    0
    Location:
    Near Worcester, Mass
    Hey

    This has to do with the making your own headset post, but I didn't want to get that one to off topic so I created a new one. Basically I havn't done any real wiring besides small circuit board and have never actually wired something like a 3.5mm plug or a 1/4" or anything like that.

    I was wondering if anyone knew some sites ( I looked and didn't find anything too useful ) that either described or showed how to wire a male or female 3.5mm Plug, or if anyone wanted to write up how to do it.

    Any help would be great.

    Thanks, Nick
     
  2. BillESC

    BillESC Well-Known Member Premium Member

    Messages:
    2,307
    Likes Received:
    344
    Location:
    Kilmarnock, VA
    Hi Nick,

    I hope your eye sight is good and your soldering iron has a small tip...

    We make audio adapters all the time and the 1/8th inch plugs are one of the most difficult to do.

    As for the wiring, white to tip, black to ring and shield to sleeve.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice