Control/Dimming Marquee Help

irish79

Member
In the old version of the Marquee software there was an option under hardware set up to configure the slider panels and wings. I am trying to find this in the newer version of the software and can not seem to locate it any where.Does any one familiar with the board know where this may have been moved to?
 
Feel free to email us with further questions regarding software.
support (at) horizoncontrol.com

The sliders in Version 4 of Marquee are automatically set to a
function based on the A/B and C/D playback masters.

So
(F3) Hardware Setup
then
(F8) A/B C/D

the most common configuration is to set A/B to
"Cue List A/B PB Master + Crossfader",
and C/D to
"Cue List C/D PB Master + Crossfader".

At that point all sliders on the desk become lookmasters,
which can be recorded as desired.
If channel handles is what they want, that is simply a function of the
recorded looks priority and fixture count, and intensity level.


All of the other modes are mostly preset modes,
which rarely people would be using.
 
Last edited by a moderator:
I talked to the guys at Horizon Control and they recommended the following...

First off, anytime you have a Marquee question, just email [email protected]

Now for the software info...

The sliders in Version 4 of Marquee are automatically set to a
function based on theA/B and C/D playback masters.
So
(F3) Hardware Setup
then
(F8) A/B C/D

the most common configuration is to set A/B to
"Cue List A/BPB Master + Crossfader",
and C/D to
"Cue List C/DPB Master + Crossfader".


At that point all sliders on the desk become lookmasters,
which can be recorded as desired.
If channel handles is what they want, that is simply a function of the
recorded looks priority and fixture count, and intensity level.

All of the other modes are mostly preset modes,
which rarely people would be using.
 
Listen to BrianEvans, he IS Horizon tech support. I have used Horizon for 8 years now. the very few times I have need assistance, he has been a great help.

~Dave
 

Users who are viewing this thread

Back