I need a display booth counter top smoke/haze effect. From what I’m told so far, the counter top will be no more than say 3 to 4" thick and need 4 vents on the counter top to be installed between 5 lighting fixtures. The fixtures are luckily already figured out except for the transformers. They will be GE type H7604 lamps which at 50w/12.8v provide an astounding.100,000 center beam candle power for the 7°x5° beam spread PAR 36 lamp. It would seem that there is nothing more powerful with a serviceable life in that size short of going HMI lamp with ballast and electronics starter costs, or something requiring a reflector in a 4.5"dia x no more than 6" long fixture. Anyone guess I’m creating laser beams within the counter?
Anyway, I have heard of pencil type foggers and other small foggers, but this is for a trade show and as such would have to run about 14 hours per day. Might be possible to by pass such storage things on a pencil fogger as if it were a butane blow torch, but still I’m looking for a better haze/smoke idea that is smaller than 3" high, or something that is powerful enough to go thru a small tube from a distance away from the counter, than break out into the four vents. Not as easy as it might seem.
Ideas???? Products etc?
Anyway, I have heard of pencil type foggers and other small foggers, but this is for a trade show and as such would have to run about 14 hours per day. Might be possible to by pass such storage things on a pencil fogger as if it were a butane blow torch, but still I’m looking for a better haze/smoke idea that is smaller than 3" high, or something that is powerful enough to go thru a small tube from a distance away from the counter, than break out into the four vents. Not as easy as it might seem.
Ideas???? Products etc?