So ... I have two DDS-6000-20 dimmer backs, each with a broken channel PC board. I am HOPING I can swap the channel boards around and come out with one working dimmer. However, I have a couple of questions about component compatibility.
First, the channel boards are different PC numbers. One dimmer is a 1996 Leviton and has TWO PCB-00037-0 Rev "C" channel boards. The other is a 2004 Leviton and has ONE PCA-00037-0 Rev "D" and ONE PCB-00037-0 Rev "D" channel boards. So, can I use a 1996 PCB-00037-0 Rev C board and a 2004 PCA-00037-0 Rev D board with the rest of the components in the one of the dimmers ?
Second, the 2004 dimmer is Multiplex and the 1994 dimmer is DMX. I would prefer rebuild this as a DMX dimmer, but I have a use for it either way. Can I just wire the channel boards to the 1996 dimmer with the DMX control board and make it work ?
If there are details I missed please let me know.
Thanks
Jack
First, the channel boards are different PC numbers. One dimmer is a 1996 Leviton and has TWO PCB-00037-0 Rev "C" channel boards. The other is a 2004 Leviton and has ONE PCA-00037-0 Rev "D" and ONE PCB-00037-0 Rev "D" channel boards. So, can I use a 1996 PCB-00037-0 Rev C board and a 2004 PCA-00037-0 Rev D board with the rest of the components in the one of the dimmers ?
Second, the 2004 dimmer is Multiplex and the 1994 dimmer is DMX. I would prefer rebuild this as a DMX dimmer, but I have a use for it either way. Can I just wire the channel boards to the 1996 dimmer with the DMX control board and make it work ?
If there are details I missed please let me know.
Thanks
Jack