carsonld
Active Member
I have orchestra shell with a hydraulic mover. There are a total of nine towers. Anytime I need to load in the shell, I need to plug in the mover a good week in advanced for the battery on board to charge. This would be fine if it charged the battery for the entire load in. But about 4-5 towers in gets to the point where it will only lift it a little off the ground but not enough to move the tower. I am guessing the battery is about 12 years old now. The battery in the mover right now is a Werker Marine Dual Purpose High Performance Marine Battery. Its part number is 24MDP its CCA is 550 and its Min @ 250AMPS is 120.
So being a school district we are limited on who we can purchase from. O'Reillys does not have this battery and cannot order it. However, he said he had batteries that the CCA was 550 but I wasn't sure if that would work... I am not too familiar with these terms. I'm doing some research but would rather get solid advice from people who might know what they are talking about.
Thanks!
So being a school district we are limited on who we can purchase from. O'Reillys does not have this battery and cannot order it. However, he said he had batteries that the CCA was 550 but I wasn't sure if that would work... I am not too familiar with these terms. I'm doing some research but would rather get solid advice from people who might know what they are talking about.
Thanks!