A crude approach that would ease the problem is to setup the rig such that you come back to a single switch. Then build a unit with a second or two of timer that then engages relays to connect the speaker lines.
If you build it right, then the relays should click out almost as soon as the power is cut and that should reduce the power off pops too...
If you are going to do it more properly, you build a fuller speaker protection module...
If you build it right, then the relays should click out almost as soon as the power is cut and that should reduce the power off pops too...
If you are going to do it more properly, you build a fuller speaker protection module...
