Hello,
I am wondering if I can take four 1k par cans and by setting a max patch value of 50% on the console that i will be able to two-fer all the lights to one circuit of 2.4k.
What my problem is that i use a four color cyc light wash but only have 3 cell cyc lights and so i want to buy the par can in the gap between my cyc lights. The lamps in my cyc lights are 500w and so if i cap the 1k pars at 50% they are in theory around 500w.
My color order right now is with all cyc lights
R A G | B R A | G B R | A G B | R A G...and so on
I want it to be with a cyc..par..cyc order
R A G | B | R A G | B | R A G | B...and so on
that way it will balance out the wash.
I have a ton of pars just floating around so to dedicate 18-20 lights for this is nothing.
Any thoughts?
Thanks,
Jeremy
I am wondering if I can take four 1k par cans and by setting a max patch value of 50% on the console that i will be able to two-fer all the lights to one circuit of 2.4k.
What my problem is that i use a four color cyc light wash but only have 3 cell cyc lights and so i want to buy the par can in the gap between my cyc lights. The lamps in my cyc lights are 500w and so if i cap the 1k pars at 50% they are in theory around 500w.
My color order right now is with all cyc lights
R A G | B R A | G B R | A G B | R A G...and so on
I want it to be with a cyc..par..cyc order
R A G | B | R A G | B | R A G | B...and so on
that way it will balance out the wash.
I have a ton of pars just floating around so to dedicate 18-20 lights for this is nothing.
Any thoughts?
Thanks,
Jeremy