In high school, we had 26 degree source fours in
FOH, and 36 degree S4's scattered around in the electrics. We also had
Colortran 6" fresnels lamped at 750w. Our cyclights were 3-cell L&E Runts, lamped at 750w as well.
In college, we have a ton of
Altman 360Q's of all shapes and sizes. Anything from 4.5x6.5 all the way up to 6x22 can be found in our inventory. Lots of source fours as well; we have a couple 10 degree units, plus a ton of 19, 26, and 36 degree units, plus a few 50 degree lenses. The S4's here are almost exclusively reserved for
gobo projection and
scroller use, plus any other special effects that may be put into an
ERS. The Altmans don't get anything but
shutter cuts and gels on the front. We have a lot of PAR64 cans used for downlight. We also have a growing number of S4 pars, which are also used for downlight and for other purposes. We've also got some PAR56 strips and
MR16 strips. We also have a lot of 6", 8" and two 12" (5kW) fresnels. Cycs are coverered by 4-cell far cycs, lamped at 1kW or 1.5kW depending on the show. They're also covered by 3-cell groundrows, which also occasionally get hung with C-clamps (as they are right now for Urinetown). They're lamped at 1kW.